1. OPEN TO ALL V6 American made front wheel drive steel bodied cars from 1990 and newer with a minimum wheel base of 2615mm or 103". Only cars made by General Motors, Ford, and Dodge are eligible, regardless of manufacturer. No convertibles or SUV’s. This class is designed to be a pure stock class using all factory computer controls. If you are not clear as to what type of car this is please call the Tech Inspector.

2. DRIVERS COMPETING IN THIS DIVISION WILL NOT BE ELIGIBLE TO RACE IN ANY OTHER DIVISION. THIS DIVISION IS DESIGNED FOR THE RACER WHO HAS A SMALL BUDGET AND WANTS TO COMPETE IN A WEEKLY SERIES.

3. Body lines must remain stock as manufactured. All body components must maintain year and model of vehicle. VIN number tag must remain on the firewall of windshield base. No body panels below frame rails, stock rocker panels only.

4. No cowl openings or hood scoops, no bolts or other supports to raise hoods at windshield.

5. All glass must be removed except windshield. Windshield may be replaced with Lexan. Windshield must be supported as stated in street stock rules.

6. All headlights, door handles and body trim must be removed. Light openings can be covered with aluminum or tin.

7. Interior of car must be completely stripped with the exception of the instrument cluster and computer location.

8. Driver must sit in factory stock location. All pedals must remain stock in the factory location. Floor pan must remain stock front to rear, with all rusted areas repaired using 22 gauge steel.

9. Front firewall must remain stock wit all holes covered with 20 gauge steel. Rear firewall must be sealed off completely with 20 gauge steel.

10. Battery must remain in stock location. BATTERY SHUTOFF SWITCH MAY BE REQUESTED.

11. Front and rear bumper must remain in stock location. Bracing is permitted behind the bumper cover. No external bars permitted. One exterior rub rail may be used on each door. They must be mounted tight to body of car.

12. Minimum weight WITH DRIVER IN CAR and no fuel added after race:

3.1 liter engines or smaller must be 3050 lbs.

3.1-3.4 liter engines must be 3150lbs.

3.4 or larger engines must be 3250 lbs.

Left side weight will be no more the 54% of car without driver.

13. Competitive weight equalizer- 2 consecutive feature wins you must add 50lbs. must be added to current legal weight. Every consecutive win after you must add another 25lbs. To your legal weight.

14. Steering column must remain stock and car must start with key.

15. Lift chains or cables on front and rear for towing.

ENGINE AND TRANSMISSION:

1. Stock unaltered V6 engine and transmissions. Engine must match make and model. No turbo’s or superchargers. Maximum number of valves is 2 per cylinder. No 4-cam engines allowed.

2. No antifreeze allowed.

3. Only production automatic transmissions for the year and model allowed. No standard shift.

FUEL SYSTEM:

1. Stock fuel tanks and pumps mounted in factory stock location only. Fuel cells will be addressed as needed. This is subject to change.

INTAKE AND EXHAUST:

1. Stock air intake only . After market air filter elements may be used.

2. Engine must use all factory intake and injectors for make and model with all factory sensors connected. NO aftermarket or special order items allowed.

3. Exhaust must be factory stock manifolds with ONE outlet. One muffler or catalytic converter is required. Exhaust must be routed to the outside of the vehicle behind the driver. No dual exhaust.

IGNITION:

1. Factory stock ignition only. NO aftermarket computers of chips.

ROLL CAGE AND SAFETY:

1. Minimum roll cage mounting will be 8 mounting points, with 4 mandatory 4 horizontal door bars and 3 vertical bars. Main cage supports must be attached to the floor with a 4"X4" plate that is 1/4 inch thick. The plate must be bolted and welded to the factory frame or floor. Each cage will be checked for a safe installation. Full cages are recommended. Use street stock section for the dimensions of the tubing and for installation help.

2. Aluminum racing seats are mandatory. They will be mounted as stated in street stock section.

3. Quick release five-point seat belts designed for racing is mandatory. All belts must conform to the street stock mounting specifications. All belts must have an identification tag. Age of safety belts to be determined at a later date.

4. Padding will be required on all bars that come in contact with the driver. Steering wheel hub must be padded.

5. Full coverage driver racing suit with an approved snell rated helmet will be required. Check the general safety rules for specifics.

6. Head and neck restraints may be required, this information will be released in the near future.

7. Window net is required on drivers side. It must be 1 inch web with a quick-release mandatory.

8. All teams must have and maintain a one-way radio/scanner for direct communication with the Spencer Speedway tower. This has helped with positioning and safety. Track radio-154.600

9. Fire extinguisher must be mounted within reach of the driver and the track crew.

SUSPENSION AND BRAKES:

1. No heavy duty or limited suspension parts allowed. No adjustable shocks or spring adjusters. No spring rubbers.

2. Spring and shocks must be stock for make and model of car. No cutting of springs. No aftermarket springs. No slotting of holes or altering of shock towers or struts allowed to gain camber correction. Maximum gain will be what the factory gives for factory adjustments. Brake rotors must be factory stock with stock pads, no heavy duty or limited production items. No brake bias adjustments.

3. All brakes must be in working order and MUST work.

4. Front end camber settings are maximum of the right front is 3* positive and maximum on the left front is 1* negative.

5. All brake fluid lines and hoses must be in inspectible condition. Anti lock systems may be removed.

TIRES AND WHEELS:

1. Tire size will be the standard size for make and model with tread wear fo 300. No over size tires. Only 15" diameter size tires will be allowed. If your car came with 16" wheels, like Pontiac Gran Prix, then you will have to use wheels off a Chevy Lumina to get the 15" dimension.

2. Wheels must be steel only. No aluminum wheels will be permitted. All 4 wheels must be the same offsets. No spacers or adapters.

3. 215-60-R15 will be allowed. If 60"series are used the must be on all 4 wheels with minimum tread wear of 300.

4. No tire shaving or cutting.

Amendment 4/18/10 - Spring rubbers are allowed

After 3 years of being track champion you must move up to the next class.

While the above rules offer a good outline, not everything can be covered by a written rule. If you want to run anything not covered ask John White or Chuck DeRidder first before doing so. If you don’t ask and anything is found it will automatically be ruled illegal. Any item found illegal will be confiscated!